Aethra THE VOICE ISDN Guia de Instalação Página 1

StarVoiceInstallation Guide

3 Installation Installation is simple and quick. For easier installation please follow the sequence of operations illustrated in this Manual. 3.1 Pac

3.3 Connections Connections are available on StarVoice back panel. They depend on the model and contract with the service provider. StarVoice has the

3.3.2 Console interface Connect your PC serial port to the Console interface with the cable supplied with StarVoice to access local configuration, dia

Every analogue interface can power a socket system with 1,000 m maximum length (using cables with 6/10 diameter wires) with maximum three telephones.

The number of active ports depends on the contract subscribed with the service provider.If you have a contract for one active line, use port 1; for

3.3.6 ADSL or SHDSL (WAN) The ADSL or SHDSL connection is made by connecting the cable to the LINE port and the public telephone socket provided by t

high-quality analogue ports; ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ATM (Asynchronous Transfer Mode) transportation: it supports up to 8 VC’s (virtual circuits) for da

LED status LED function OFF ON FLASHING (...) GREEN Correct connection with public exchange modemLINE RED Device initialization Alternate RED GRE

4.3 Back panel According to the model (see 2.1), the back panel houses the following connections: Figure 4-2 – Back panel No. 1 LINE port for ADSL

4.4.3 SHDSL interface The SHDSL network interface complies with the ETSI TS 101 524 standard. StarVoice supports line rates from 192 to 2304 Kbps (3 t

STARVOICE INTEGRATED ACCESS DEVICE INSTALLATION GUIDE Rev.1 DATE: February 2003 Rights CopyRight 2003 Aethra SpA All Rights

4.5 POTS and ISDN-BRI lines 4.5.1 POTS lines POTS lines delivery high quality service and error-free connections to all analogue telephones. Signal

ID profile UUI range Coding law, bit rate Packet length 1 0…15 PCM, G.711, 64 kbps 40 0…7 PCM, G.711, 64 kbps 44 8…15 ADPCM, G.726, 32 kbps

If PPP (RFC2364 or RFC2516) is used, StarVoice manages the authentication procedure for local hosts. If PPPoE is used, StarVoice implements the discov

The mechanism is based on the formulation of rules used to filter incoming and outgoing traffic. The rules are contained in one or more lists, defined

4.7 Management 4.7.1 Local management StarVoice provides one V.24/RS-232 serial interface to connect an asynchronous terminal or PC. Local configura

5 Configuration 5.1 General information After you have made the connections illustrated in 3.3, choose the configuration mode from the ones illustrat

5.1.2 Preliminary operations for internal WEB server use Connect a PC with LAN interface to one of StarVoice Ethernet ports. In the “Properties” opti

5.1.3 Internal WEB server configuration with Quick Start By using the DHCP services for the automatic configuration of network parameters in the LAN

 Enter encapsulation type and LLC SNAP mode and click Next;  Different parameters must be entered based on encapsulation mode (PPP, RFC1483, etc.).

 Enter VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) values for CPIWF1, (interface that enables voice service). This informatio

INDEX Safety Rules ...

5.2 System passwords Two user levels are available: Administrator; ⇒ ⇒ User. To discriminate the level you must configure two different passwords fo

5.3 How to change the IP address After you set the configuration parameters and before you connect StarVoice to an existing LAN, check that the defa

6 StarManager StarManager is a simple installation application5 that uses StarVoice console port to communicate with the device. It is contained in th

6.2 LAN and DHCP server configuration  Enter IP address and Subnet mask;  Check the box to use the DHCP server. A new window appears (see below

 If you select PPP encapsulation, you must enter the parameters shown here on the left;  If you select RFC1483 encapsulation, you must enter th

6.5 Password  You can enter a password to protect the new configuration. 6.6 Configuration parameters  Configuration parameters are shown in t

6.7 File Download You can transfer a configuration file or firmware upgrade from the PC to the device.  Select this button to open the window used

APPENDIX “A” – Specifications Technical features Analogue lines (POTS) Call Insertion mode: unbalanced ⇒ ⇒ Frequency : 25Hz + 2Hz Level with Z =

ATM ITU-T I.361, I.363.5, I.363.2, I.432, I.610, I.732 ⇒ ⇒ ATMF UNI 3.1, ATMF Traffic Loop Emulation Services and Narrowband Signaling ATM Forum af-

Pag. 39 Operation and storage conditions OPERATING TEMPERATURE -5°C ÷ +45 °C OPERATING RELATIVE HUMIDITY 10% ÷ 93 % (without condensation) STOR

4.6.4 IP Routing ... 22 4.6.5 Network

SAFETY ADVISES SAFETY RULES DEVIEC IN CLASS II WITH FUNCTIONAL EARTH Always connect to a grounded socket. To guarantee continuous protection for ope

WARNINGS CAUTION: Many of the components used in this device are sensitive to electrostatic charge. In case of manipulation of the connection cab

1 Introduction StarVoice is a family of ADSL and SHDSL products developed to provide an integrated wide band voice and data device. StarVoice stems f

ADSL Asymmetric Digital Subscriber Line ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ATM Asynchronous Transfer Mode ATOS Aethra Telecommunications

2 Models StarVoice is available with different configurations to provide the ideal solution to the most diverse requirements. SV10xy models1 are based